pro clima Windtight Systems

    SOLITEX WA

    Vapour permeable wall lining membrane

    pro clima SOLITEX WA is a tough, breathable membrane specifically designed to protect and enhance timber frame structures. It can be applied in the factory to the external face of pre-fabricated wall panels, or on-site to timber frame wall assemblies.

    • Spun-bonded high density polypropylene nonwoven micro-fibre fleece.
    • Optimum protection for the structure against driving rain, snow and dust during construction.
    • Continues to protect the structure against excessive damp and any water ingress that may penetrate the outer cladding.
    • Contributes to an overall moisture control solution for timber frame structures.
    • Protects exterior sheathing material in a timber frame wall construction from excessive dampness and degradation which may otherwise be caused by water ingress, while at the same time allowing the sheathing material to breathe in order to prevent mould or other fungal growth.
    • In locations of extreme exposure overlaps of pro clima SOLITEX WA can be sealed with pro clima Duplex double sided tape or pro clima TESCON NO 1 single sided tape.
    • SOLITEX WA offers high UV stability.
    • SOLITEX WA is available in a large range of dimensions and colours and is IAB Certified.
    • Black – reduces the risk of visibility through timber cladding.
    • CE logo
    • NSAI

    TECHNICAL DETAILS

    Property Details
    Membrane 100% polypropylene
    Water Vapour Resistance 0.038 MNs/g
    Fire Rating E
    Temperature Resistance -40C to +100C
    3rd party accreditation CE and IAB
    Colour Black
    Roll Width 1.5 metres
    Roll Length 50 metres
    Usage Exterior only

    Architects and Designers - please download a copy of our pro clima air and windtight specification guide to view the pro clima air and windtight NGS specification clauses.

    The specification has been prepared for us by National Green Specification

    Advice and recommendations made on the use of materials and construction details are based on the knowledge of Ecological Building Systems Ltd and Ecological Building Systems UK Ltd and are given in good faith as a general guide and a service to designers, contractors and manufacturers.

    There are no specific installation instructions for SOLITEX WA however further details can be found at