Auro Colours for Life Gloss Paint 516
Auro Colours for Life Gloss Paint 516
Gloss Paint for interior and exterior wood and metal
Please note: screens cannot be relied upon to accurately replicate colours. All colours are mixed to order and are non returnable. Select a colour to view prices.
Product calculator
Product Overview
Main purpose
Solvent-free, white and coloured gloss paint for use on wood and metal.
Use it on
Interior and exterior hardwoods or softwoods, furniture, doors, skirting, architraves and all wood based materials. Use it on metal after priming with Auro Rust Protection Primer 519
Overview
This is the new updated and easier to apply version of the Auro Gloss Paint 250. It is available in the 60 colours as displayed and also in white and other colours available upon request. The quick-drying paint does not yellow and achieves the best possible results for wet abrasion resistance and covering power according to DIN EN 13300. It fulfills the requirements of DIN EN 71-3 which is safe for toys and the DIN 53160 which guarantees sweat and saliva resistance.
Features
- Breathable Paint
- Excellent Coverage
- Transparency of Ingredients
- Virtually VOC free (<=1g/l)
- Easy to Apply
- Safe for Toys
- Vegan
Benefits
- Wide range of colours now available.
- Quick Drying
- Allows the Surface to Breathe
- Does not yellow
- Won’t flake
- Excellent abrasion resistance
- Brush, roller or Spray application
- Overcoatable after 6 hours
- It can be used on Childrens Toys and Cots without any harmful effects Tested according to DIN EN 71, Part 3
- Saliva- and perspiration-proof according to DIN 53160
Questions
I don't see the colour I previously ordered here, where would I find it?
Technical Details
Key Technical Data
Installation Guide
Most bare timber can be painted by firstly priming with the Gloss Paint 516 diluted with 5% water. We recommend a very light sanding in between coats using 220 grit sand paper. The following coats should then be applied un-thinned.
Some woods contain active substances which can leave staining, tanning or lead to drying delays. (oak, chestnut, larch, red cedar, meranti are some examples) for these types of wood it is recommended that the Auro Colour For Life Paint Primer 510 is used as a primer coat. Even if unsure what the timber is the primer can be used on all timber.
If in doubt about what your wood is, this primer can be used on all wood.
The Auro Gloss Paint 516 can also be used on metal but only after priming with the Auro Rust protection primer 519
It is very easy to apply by brush, roller or by spraying. It is quick drying, it will be dust dry after 2 hours and recoatable after 6 hours. Generally 2 – 3 coats are desired. If painting over a previously painted surface, a light sanding would be desired, and it is good practice to test a small area before undertaking any large job for compatibility.
Tools should be cleaned with water and Auro Plant Soap 411.
