Auro Care Oil 106
Product Overview
Main purpose
To care for and protect all wooden surfaces which have been treated with Auro oils
Use it on
Wooden furniture or floors treated with Auro oils
Overview
Wooden surfaces which have been oiled need to be cared for to keep them looking their best and to keep the wood protected. The Auro Care Oil helps to keep the surface looking it’s best.
Features
- Environmentally Friendly
- Natural Ingredients
- Transparency of Ingredients
- Easy application
- Product is Compostable
- Breathable
- Vegan Friendly Product
Benefits
- Consistent Ecological Raw Materials
- Tested according to DIN EN 71, Part 3, “Safe for toys”
- Ingredients are listed on the tin and in the data sheet
- Applied by Cloth, Pad, or Sponge
- Excellent coverage 83 sq/m per Litre
- Overcoatable after 24 hours
- No harmful waste to dispose of
- Will not trap moisture in the wood
- Oil won’t flake off
- Plastic Free
- Child and Pet Safe
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
How to install
The surface should be firstly cleaned using for example Auro Floor Cleaner 427 for floors or Auro Paint and Stain Cleaner 435 for furniture surfaces. The surfaces should then be allowed to dry fully, if the surface is rough a fine sanding can be done by using very fine sandpaper. Avoid using any sanding or grinding objects containing metals as these can lead to undesirable staining.
For smaller surfaces such as wood panels or furniture the Care Oil 106 should be applied to a water moistened cloth or sponge then distributed evenly on the surface. After approx. 10 minutes the milky appearance should disappear, and the surface can be polished. After 24 hours of drying the surface can bear loads again, and another coat can be applied (only if necessary).
It is applied a little different on floors. For the 1st coat the Auro Care Oil 106 is diluted 1:1 with water. It should then be distributed across the floor leaving a slightly wet layer. After 15 minutes a polishing machine with a white or beige pad should be used to polish the floor. Again 24 hours should pass before the floor is walked on or exposed to water. If applying another coat, the oil should be applied undiluted and again polished the same way.