Auro Wainscot White 814
Auro Wainscot White 814
A waterbased white wood paint which allows the wood effect to show
For a breathable protective layer on wood which still allows the wood effect to show through.
Use it on
Interior wood, wood-based materials, wooden surfaces not exposed to weathering, timber panelling.
The Auro Wainscot White 814 brightens up yellowed and brown timber while still allowing the woods grain to show through. It provides a breathable protective layer on the wood which is VOC Free, water thinnable, low odour, solvent and biocide free.
Where to use it
The Auro Wainscot White 814 is suitable for interior wood and wood-based materials (Not for Floors). The paint has a very low odour, it’s solvent-free, it can be used on Children’s Toys and Cots without any harmful effects it is tested and certified as Safe for Toys and is Saliva- and perspiration-proof. It can be thinned using water and is virtually VOC Free. It is available in a 2.5 litre which will cover approx. 34sq/m.
What it does
It is an excellent environmentally friendly choice for painting your wooden panelling, it gives a beautiful matt finish which will still allow the woods grain to show through. It has a very high pigment concentration.
Why we love it
Old timber can very often darken a room by looking dark and yellowish, this product will lighten up the room. It is certified as safe for toys (DIN EN 71 Part 3) and saliva and sweat proof (DIN 53160). It is made from natural occurring materials and minerals.
It is made from entirely natural ingredients, the product can be composted and thus returning to the natural lifecycle of materials
How it works
The paint when applied and dried creates a lovely white, matt finish on the timber. For untreated timber which does not contain active substances the Paint can be used directly onto the panelling. If it is a timber containing active substances (for example; chestnut, larch, red cedar etc…) the Auro Special Primer 117 must be used before applying the Auro Wainscot White 814. The base for this should be smooth, slightly absorbent, dry, neutral, free of dust and grease, Auro Wainscot white can be thinned with 10% water.
Hints and tips
Always apply in the direction of the wood grain.
It is recommended to paint the full length of each panel to avoid overlaps when painting panelling.
Before use, Auro Wainscot white 814 should be well stirred as pigments can settle out at the bottom of the tin
- Environmentally Friendly
- Non-toxic, organic and Safe
- Transparency of Ingredients
- Easy application
- Paint is Compostable
- Vegan Friendly Product
- Consistent Ecological Raw Materials
- Low odour
- Solvent Free
- VOC Free
- Water thinnable
- Tested according to DIN EN 71, Part 3, “Safe for toys”
- Tested according to DIN 53160, “Saliva- and perspiration-proof”.
- Brush, roller or spray application
- Good coverage 13sq/m per Litre
- Overcoatable after 24 hours
There are currently no questions and answers published for this product
Key Technical Data
Bare timber – Firstly ensure the surface is smooth, slightly absorbent, dry, free of dust and grease. Clean the surface with Auro Paint and Stain Cleaner 435. Thin out the 1st coat of AURO Wainscot White 814 with 10% water. The surface will be dust dry in 6 hours but allow 24 hours before applying a 2nd coat unthinned. A very light sanding should be done between coats. It is recommended to paint the full length of each panel to avoid overlaps when painting panelling.
If it is a timber containing active substances (for example; chestnut, larch, red cedar etc…) the Auro Special Primer 117 must be used before applying the Auro Wainscot White 814.
Previously painted Surfaces – If the surface was previously painted using the Auro Wainscot White 814 ensure the surface is cleaned with Auro Paint and Stain Cleaner 435 before recoating. For unknown surfaces please ensure to test an area first for compatibility.