Auro Worktop Oil 108
Product calculator
Product Overview
Main purpose
To protect the surface from water and dirt while still allowing the surface to breathe. To emphasise the woods natural grain patterns.
Use it on
Solid wood worktops, tables and counter tops
Overview
The Auro Worktop Oil is a clear breathable oil suitable for interior surfaces such as Counter tops, Worktops, and Tables. It is made from natural ingredients from renewable and mineral sources. It is solvent free, durable and washable. It produces a slightly honey hue. The Auro Worktop Oil does not contain any synthetic ingredients or solvents and is vegan friendly. It is long lasting and when eventually worn it can be very easily renovated by adding another thin layer of oil.
Features
- Breathable Oil
- Easy to Apply
- Simple Renovation Process
- Long term Durability
- Certified Safe for Toys and Saliva and Sweat Proof
- Transparency of Ingredients
- Beautiful Finish
- Paint is Compostable
- Solvent Free
Benefits
- Allows the surface to breathe
- Contributes to a good indoor air climate
- Brush, roller, spatula or cloth application
- Good coverage 22sq/m per Litre
- Quick and easy renovation when needed by adding a thin layer of Worktop Oil
- Saves time and money
- Resists wear and tear to prolong renovation
- Protects the wood from damage
- Washable
- Made from only natural oils
- Transparency of ingredients
- All ingredients are compostable
- Shows up the natural grain of the wood
- Gives a slight honey colour with a slight shine
- Virtually VOC Free
Questions
Can the worktop oil be used on a kitchen table?
Technical Details
Key Technical Data
Installation Guide
It is very easy to apply by brush, roller, spatula or cloth. When applying any Auro oil, the aim is to have all the wood’s pores filled with oil, so they are fully saturated. To improve absorption, the Auro Worktop Oil can be thinned with Auro Orange Oil 191 up to 20%. When applying the oil, it is important to wipe away any excess that has not been absorbed by the wood within 20-30 minutes. After 24 hours the process of applying and removing excess can be repeated until the wood is fully saturated. Generally, 2 coats are sufficient. For very absorbent woods, you will see that all the oil has been quickly absorbed after the second application and therefore a further application will be needed. Full hardness is achieved after 4 weeks so it is important to treat the surface with care during this period.