Auro Decking Oil 110
Product calculator
Product Overview
Main purpose
To colour and protect timber decks
Use it on
Hardwood and softwood timber decking and terraces
Overview
The Auro Decking Oil 110 is available in 3 colour shades: Teak, Larch and Bangkirai. This product offers excellent colour and protection to your wooden decking and terraces, while allowing the surface to breathe.
Features
- Breathable Oil
- Vegan Friendly
- Environmentally Friendly
- Transparency of Ingredients
- Easy application
- Versatile product
- Easy to Maintain
Benefits
- Allows the timber to breathe
- Will not trap moisture in the wood
- Consistent Ecological Raw Materials
- All ingredients are compostable
- Brush, roller or cloth application
- Good coverage 20sq/m per Litre
- Overcoatable after 24 hours
- Renovation is simple by adding another oil application without the need for heavy sanding
- A cleaning and light sanding is all that’s needed before renovation
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
It is recommended that surfaces are cleaned firstly using Auro Terrace cleaner 801 and then lightly sanded before applying the oil. The oil should be stirred well before application to ensure uniform distribution of pigment and it should be stirred regularly during application.
The oil is suitable for both new hardwoods, softwoods and for clean, dry, non-greasy and absorbent wood which has been lightly pre-oiled or may be slightly weathered. A test patch is always recommended for compatibility on previously oiled surfaces.
For an initial treatment of new, untreated wood, the oils can be applied using a brush or roller. Before drying, which takes around 20-30 minutes depending on the ambient temperature, any excess which has not been absorbed in this time should be removed using a fluff free cloth.
After leaving to dry for approx. 24 hours, a further coat can be applied. A light sanding should be done in between coats. Further coats will intensify the colour tone of the wood and give increased protection. Repeated treatment will produce a slightly satin finish surface. Generally 2 coats are desired.
Tools can afterwards be cleaned with Auro Orange Oil 191.
