Auro Clear Lacquer Gloss 251
Product Overview
Main purpose
An environmentally friendly, nontoxic gloss finish for interior wood
Use it on
Wood, wood-based materials, furniture, doors, skirting.
Overview
The Auro Clear Varnish Gloss 251 provides a transparent hard-wearing finish to your interior timber. This gives a higher sheen level than the Satin varnish of this product. Commonly used on doors, architrave, skirting, wooden ceilings and furniture – not suitable for floors. It is solvent free and dilutable with water
Features
- Environmentally Friendly
- Non-toxic, organic and Safe
- Transparency of Ingredients
- Easy application
- Vegan Friendly
- Versatile product
- Hard wearing
- Compostable
Benefits
- Consistent Ecological Raw Materials
- Low odour
- Solvent Free
- Low VOC content <10g/Litre
- Water thinnable
- Tested according to DIN EN 71, Part 3, “Safe for toys”
- Tested according to DIN 53160, “Saliva- and perspiration-proof”.
- Brush, roller or spray application
- Good coverage 13sq/m per Litre
- Overcoatable after 24 hours
- Can be used on all types of timber in conjunction with relevant primer
- Abrasion Class 1 in accordance with testing to EN 13300
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
Priming: For timber which has not been painted or varnished before, priming can be done by using the Auro Hard Primer 127 or by thinning out the first coat of varnish with 20% water. Certain Wood types can cause tannin, discolouration and drying delays these should be primed with Auro Special Primer 117.
After priming 1 or 2 further coats should be applied giving a light sanding in between coats.
Renovation: The renovation process is very simple, a light sanding before reapplying the varnish is all that is needed before getting it looking like new again.
It is very easy to apply by brush, roller or by spraying. Coverage is up to 13sq/m per litre. We recommend leaving 24 hours in between coats. If painting over a previously painted surface, a light sanding would be desired, and it is good practice to test a small area before undertaking any large job for compatibility.
The tools should be cleaned with water and Auro Plant Soap 411 after use. If necessary Auro Orange Oil 191 can be used too.