Auro Clay Paint 331 - White
Product calculator
Product Overview
Main purpose
A highly breathable and natural white Clay Paint for interior use
Use it on
Suitable for interior surfaces, plaster, clay, concrete, sand-lime brick, gypsum plaster boards, wallpaper, brick, lime plaster, old coatings able of wetting
Overview
Auro High-grade Clay paint is the first ready-to-use clay paint on the market that has no preservatives at all (No MIT, BIT, thiazoles). It is highly breathable so especially suited for areas where moisture can be an issue.
Features
- Highly Breathable Paint
- Excellent Coverage
- AgBB Certified as class A+
- Transparency of Ingredients
- Plastic Free Paint
- Vegan Friendly Product
- Easy to Apply
- Paint is Compostable
- Suitable for Allergy Sufferers
Benefits
- Allows the Surface to Breathe
- Reduces the Risk of Mould
- SD Value 0.015
- Does not contain any preservatives (MIT/BIT/Thiazoles)
- Certified as ‘Suited for Allergy Sufferers’ by the Institute of Environment and Health in Germany
- Coverage up to 9sq/m per Litre
- Drip and Splash resistant
- Good abrasion resistance
- Virtually VOC Free
- All ingredients are compostable
- Will not trap moisture
- Improves the indoor air quality
- Vegan Paint
- Child and Pet Safe
- Brush, roller or Spray application
- Overcoatable after 4 – 6 hours
Questions
Can I get Clay Paint in Colours?
I am looking to use this paint on lime plaster walls but I also have internal gypsum plastered walls, can this paint be used on both?
Is the Auro Clay Paint safe to use in children's bedrooms?
My child suffers from a lot of allergies and sensitivities and I am looking for a safe paint for her?
Is this product suitable for allergy sufferers?
Technical Details
Key Technical Data
Installation Guide
Suitable for all interior rooms, including kitchens, bathrooms and nurseries, older properties with potential damp problems, newly plastered walls and painting over previously painted surfaces. (We strongly recommend a test area to ensure compatibility prior to carrying out the job). The paint can also be used on wallpaper, plaster, clay plaster, lime plaster, concrete and brick. The paint can be used on new plaster by thinning the first coat of paint by 10% with water. Another option best suited for priming highly absorbent surfaces (like gypsum) is the Auro plaster Primer 301. If unsure what the surface is or it is a poorly absorbing or difficult surface, we would recommend priming with Auro Grip Coat 505. It is re-coatable after 4 – 6 hours. The following coats should be applied unthinned. A previously unpainted wall will generally need one primer coat followed by two un-thinned coats. Painting over a previously painted wall two coats is generally desirable. When painting over a previously painted surface it is important to try a test area first to make sure it is compatible.
The paint has excellent coverage – 9sq/m per litre and is very easy to apply by brush, roller or by spraying.
All ingredients are fully declared on the tin and in the data sheet. It does not contain any oils so will not yellow and emits very little odour during the drying process.
