Auro Wood Wax 187
Product Overview
Main purpose
For the refining and protection of wooden surfaces
Use it on
Wood, Wood Based Materials, wooden floors and furniture
Overview
A slightly honey-coloured wax protection with high abrasion resistance made of beeswax and plant wax for wooden or linoleum floor surfaces which can also be used on furniture. It is dirt-repellent, and solvent-free. It should be applied with a brush or roller and polished between 20 and 60 minutes after application to obtain a satin mat finish. Wood types rich in active substances should be primed with Auro Special primer 117, other wood types with Auro Hard primer 127.
Features
- Breathable Wax
- AgBB Certified as class A+
- Transparency of Ingredients
- Excellent Coverage
- Easy to Apply
- Paint is Compostable
- Non-toxic, organic and Safe
Benefits
- Allows the Surfaces to breathe
- Solvent Free
- Water based
- Low Emission
- Low odour
- Ingredients are listed on the tin and in the data sheet
- All ingredients are compostable
- Brush, roll or Spray application
- Good coverage 25sq/m per Litre
- Overcoatable after 24 hours
- Tested according to DIN EN 71, Part 3, “Safe for toys”
- Biocide free
- Water Dilutable
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
Please note product has a milky appearance, but it dries after application to give a clear transparent layer.
For bare, untreated timber prime with Auro Hard Primer 127 or Auro Special Primer 117. Allow 24 hours to dry before overcoating with the Auro Wood Wax 187.
For previously oiled or waxed surfaces which are in good condition but just need a bit of repair it is recommended to give a cleaning and sanding before treating with the Auro Wood Wax 187.
For previously oiled or waxed surfaces which are in poor condition or for surfaces where the previous treatment is unknown it is necessary to sand right back to the original surface and start with a primer again.
The Wax can be applied using a brush, roller, soft cloth or pad or by buffer machine. It must be polished while wet and soft, after 20 minutes and before 60 minutes of drying. After this period the surface can no longer be polished.
If desired, repeat the treatment after 24 hours.
Clean tools with Auro Plant Soap 411 or if necessary Auro Orange Oil 191
For regular care and cleaning use the Auro Floor Care 437, or Auro Floor Care Emulsion 431