Pro Clima Contega Solido SL



Product Overview
Main purpose
Airtight sealing tape for sealing membrane to window frames, to door frames and to masonry walls, floors and ceilings. Can be plastered over.
Use it on
Internal wall, floor or ceiling junctions. Permanently sticks to concrete, stone or masonry. Also to timber, PVC, wood or aluminium windows and doors and all Pro Clima airtight membranes.
Overview
Pro Clima Contega Solido SL is an interior airtight tape designed for airtight sealing of window and door frames and also sealing membranes at masonry junctions (wall to floor, wall to ceiling) prior to wet plastering over. Its fleecy backing gives an excellent key for wet plaster.
Features
- Time saving
- Perfect for window and door connections
- Seals membrane to masonry junctions prior to plastering
- Can be plastered over
- Reliable, strong, full surface adhesion
Benefits
- Achieves airtightness immediately at the joint and can be subjected to loading.
- Can be applied to the front internal face of a window frame and then the reveal plastered over.
- Passivhaus certified as part of the Intello airtightness system.
- Its suitability has been Independently tested in accordance with MO-01/1 passed at IFT in Rosenheim (DE).
- Excellent values in the hazardous substance test, according to the ISO 16000 evaluation scheme.
Questions
There are currently no questions and answers published for this product
Technical Details
Key Technical Data
Installation Guide
Find an installerIn the majority of cases, Contega Solido SL is installed after the door/window has been fitted. Ensure the frame of the door/window is clean and free from dust and grease. Remove the backing from the 20mm section.



Adhere 20mm of the tape onto the front internal face of the window frame and the remainder back to the reveal.
Use a Pressfix tool to make sure the tape is strongly bonded to the frame. When the window/door is installed in the building, make sure the reveal (where the tape will be stuck) is clean and free of dust. If the surface is crumbly or produces dust, use Tescon RP Primer or Tescon Sprimer to stabilise the surface and obtain the best permanent adhesion.


Remove the backing release paper gradually and firmly press the tape to the reveal with a Pressfix tool. The full area contacting the reveal should have pressure applied to it to ensure a strong bond is made between the tape and the blockwork/concrete of the reveal.
The width of the adhesive tape that is to be plastered over should generally not exceed 60 mm (2 3/8") or 50% of the soffit area.



Hints & Tips
Hints & Tips
The use of Tecscon RP Primer or Sprimer on the reveal is always recommended to ensure the surface is in an ideal condition for a perfect bond that will not be compromised.
Particular care is needed to ensure too much tape is not applied to the window/door frame as it will extremely difficult to remove at a later stage.