Auro 97 Colours Clay Paint 535
Auro 97 Colours Clay Paint 535
Highly breathable clay based paint for interior surfaces
Please note: screens cannot be relied upon to accurately replicate colours. All colours are mixed to order and are non returnable. Select a colour from the 'View 97 colours' to view prices.
Product calculator
Product Overview
Main purpose
Highly breathable clay based paint for interior surfaces available in a range of colours
Use it on
Interior walls and ceilings including lime, clay or gypsum plaster (that has been primed with Auro 321/524/301), wallpaper, concrete or brick. Also suitable for use over previously painted surfaces that are compatible with all water-based paint.
Overview
The Auro High-Grade Clay Paint Ready Mixed Colours 535 is Auro’s most breathable matt finish paint. It is virtually VOC free and water thinnable. The paint is plastic free, and is suitable for Vegans. It is available in a wide range of clay colours.
Features
- Highly Breathable Paint
- Excellent Coverage
- AgBB Certified as class A+
- Transparency of Ingredients
- Plastic Free Paint
- Vegan Friendly Product
- Easy to Apply
- Paint is Compostable
Benefits
- Allows the Surface to Breathe
- Reduces the Risk of Mould
- Sd Value 0.015
- Coverage up to 9sq/m per Litre
- Drip and Splash resistant
- Virtually VOC Free
- Will not trap moisture
- Improves the indoor air quality
- Child and Pet Safe
- Brush, roller or Spray application
- Good coverage 9sq/m per Litre
- Overcoatable after 4 – 6 hours
Questions
I am trying to match a particular colour and I don't see the shade I am looking for in these 60 colours. Are there other colours available?
How do I prime new plaster?
Is this paint breathable?
I don't see the colour I previously ordered here, where would I find it?
Technical Details
Key Technical Data
Installation Guide
How to Install
It can be applied just like any other conventional paint, by brush, roller or sprayer. It is re-coatable after 4 – 6 hours. High humidity and low temperatures could lengthen drying times.
Suitable for all interior rooms, including kitchens, bathrooms and nurseries, older properties with potential damp problems, newly plastered walls and painting over previously painted surfaces. (We strongly recommend a test area to ensure compatibility prior to carrying out the job). The paint can also be used on wallpaper, plaster, clay plaster, concrete, brick and lime plaster.
Newly plastered walls should be primed with Auro Plaster Primer 301 if they are very absorbent (for example Gypsum Plaster) or alternatively priming must be done with a coat of white Auro 321, 331, 524 so that the finishing colour is consistent. If a colour is applied directly onto new plaster without priming the finish can be inconsistent and patchy. If any filling needs to be done the Auro Wall Filler 329 can be used.
When painting dark or vibrant colours more care needs to be taken. The surface should be primed with the Auro Grip Coat Primer 505 to establish a stable base and a consistent absorbency level for it to be painted, one coat of primer will suffice. Allow 6 hours drying time before applying your colour. Apply the colour quickly working to a wet edge. Allow 24 hours drying in between coats.
It is important if being used on new lime plaster that adequate drying time passes before painting. The pH level of new lime is high and this needs to neutralize before painting can take place.
For previously painted surfaces a test patch is always recommended for compatibility. On difficult or unknown surfaces, it is a good idea to use the Auro Grip Coat 505 as a primer.
Tools can be cleaned with water, add Auro Plant Soap 411 if needed.
